GC Tempron
Temporary crown and bridge self curing acrylic
Original price was: ₹4,890.00.₹4,390.00Current price is: ₹4,390.00.
MRP Inclusive of all taxes
Product Details
Tempron is a tooth-colored resin designed for temporary crowns and bridges. It is applied to the prepared areas of the tooth by placing it into the desired section of the impression, which is then reseated in the patient’s mouth.
Indications:
- Temporary crowns, bridges, or dentures.
- Space maintenance.
Features
Rapid Cross-Linking
Tempron offers rapid cross-linking, ensuring quick setting for efficient use in dental procedures.
Smooth Surfaces
It creates smooth surfaces without any porosities, providing a high-quality finish.
Repair Suitability
Additionally, it is suitable for making repairs, offering flexibility in restorative applications.
Comfortable Working Time
With a comfortable working time, it allows dental professionals to work with ease and precision.
Specifications
Composition:
Powder: A copolymer of Methylmethacrylate and Diethyl Phthalate, along with Polymethylmethacrylate.
Liquid: Methyl Methacrylate and N,N-Dimethyl-p-Toluidine.
Package Contents
- 1 x 100g Powder
- 1 x 104ml Liquid
- 1 x Powder Measure
- 1 x Liquid Measure No.4
- 1 x Mixing Cup
Directions To Use
A. CROWNS
1. Tooth Preparation
- Begin by filling any defects in the tooth using GC CAVITON or a comparable temporary filling material.
- Take an impression with a heavy alginate material (low water content). To prevent distortion, wrap the impression in wet gauze.
- Prepare the tooth that will receive the crown.
- Create V-shaped notches in the impression from the gingival to the buccal and lingual sides to allow the escape of excess resin.
2. Mixing Process
- The recommended powder-to-liquid ratio is 1.0 g of powder to 0.5 mL of liquid (up to the first graduation on both the powder measure and the liquid pipette).
- For minimized shrinkage, use as little liquid as necessary.
- Pour the liquid into the mixing jar and slowly add the appropriate amount of powder, mixing for 20-30 seconds.
3. Application Technique
- Pour the creamy mixture into the prepared impression and seat it securely in the mouth.
- After about 3 minutes, remove the impression, leaving the resin on the tooth.
- To prevent shrinkage, remove the resin crown before it fully sets and dip it into hot water (around 50°C) several times.
- Trim excess material with a bur, then polish the crown.
- Use GC FREEGENOL or another suitable temporary cement to bond the crown in place.
B. BRIDGES
1. Tooth Preparation
- Select an appropriate artificial tooth and secure it between the abutment teeth using suitable wax. Ensure the bite is correct.
- Take a full arch impression with alginate material. Carefully remove the pontic and wrap the impression in wet gauze.
- Prepare the abutment teeth as needed.
- Follow the same procedures as outlined for crowns, from section A.1(a) to A.3(e).
