GC Equia Forte Bond

Description

EQUIA Forte Coat is a clear, highly wear-resistant, self-adhesive light-cured resin coating designed to enhance the toughness, polish, and protection of EQUIA Forte Fil restorations.

EQUIA Forte is a Glass Hybrid material that combines the latest innovations in GC’s glass ionomer and resin technologies. Together, EQUIA Forte Fil and EQUIA Forte Coat work in synergy, creating a stronger and superior posterior bulk fill material. This unique restorative system, suitable for all age groups, delivers impressive results on multiple levels.

Compared to other restorative options, EQUIA Forte offers a substantial time advantage. Its remarkable aesthetics broaden your posterior restorative options, meeting your patients’ expectations. Built on the clinically proven EQUIA system, EQUIA Forte provides an excellent alternative for your everyday restorative needs.

Indications:

Class I restorations
Class II restorations, including stress-bearing as per IFU
Class V and root surface restorations
Intermediate and transitional restorations
Core buildup

Features

Enhanced strength
Boosts aesthetics
Increased wear resistance

Specifications

Precautions

Always wear protective gloves and eye protection when handling EQUIA Forte Coat.
In case of contact with oral tissue or skin, immediately remove the material using a sponge or cotton pellet. Once the restorative treatment is complete, rinse the area thoroughly with water.
If the material comes into contact with eyes, flush immediately with water and seek medical attention.
EQUIA Forte Coat is a highly flammable liquid and vapor. Avoid using it near naked flames and keep it away from sources of ignition. Do not store large quantities in one area, and ensure it is kept away from direct sunlight.
As EQUIA Forte Coat is volatile, always use it in a well-ventilated area and replace the cap immediately after use.
If the tissue that has been in contact with EQUIA Forte Coat turns white or forms a blister, advise the patient to leave the affected area undisturbed. The mark will usually disappear within 1–2 weeks. For areas not covered by a rubber dam, applying cocoa butter is recommended to avoid contact.
Avoid inhaling or ingesting the material.
Ensure that the material does not come into contact with clothing.
Do not mix EQUIA Forte Coat with other products.
Instruct the patient to avoid applying pressure for 1 hour after treatment.
Use EQUIA Forte Fil in combination with EQUIA Forte Coat for best results.
Dispose of all waste according to local regulations.

Package Contents

1 x 4ml Bottle

Directions To Use

1. Cavity Preparation

Prepare the tooth using standard techniques, ensuring that extensive mechanical retention is not necessary. For pulp capping, use calcium hydroxide. In Class V or II situations, it is recommended to use an anatomical matrix system. Metal bands should be lubricated with petroleum jelly. Optionally, apply GC CAVITY CONDITIONER or GC DENTIN CONDITIONER to the bonding surfaces. Rinse the prepared area thoroughly with water. Gently blot away excess water with a cotton pellet or dry with an air syringe. DO NOT DESICCATE. The prepared surfaces should remain moist and appear glistening.

2. Capsule Activation and Mixing

Before activation, shake the capsule or tap its side on a hard surface to loosen the powder. To activate the capsule, push the plunger until it is flush with the main body. Immediately place the capsule into a metal GC CAPSULE APPLIER and click the lever once to activate it. The capsule should be activated just before mixing and used immediately. Next, remove the capsule and place it into a mixer (or amalgamator). Mix for 10 seconds at approximately 4,000 RPM.

3. Restorative Technique

After mixing, remove the capsule from the mixer and load it into the GC CAPSULE APPLIER. Prime the capsule by making two clicks, then syringe the material. The working time is 1 minute 15 seconds from the start of mixing at 23°C (73.4°F); higher temperatures will shorten the working time. Within 10 seconds of mixing, begin to extrude the mixture directly into the preparation. Form the preliminary contour and cover with a matrix if required. During the first 2 minutes 30 seconds after mixing, extra care should be taken to avoid moisture contamination or drying out. If this cannot be ensured, immediately apply EQUIA Forte Coat and light cure.

Note:

To adjust the direction of the nozzle, hold the applier with the capsule towards you and turn the capsule body.
To remove the used capsule, push the applier release button, twist the capsule, and pull upwards.

4. Finishing

Finish under water spray using superfine diamond burs after 2 minutes 30 seconds from the start of mixing. When applying EQUIA Forte Coat to existing EQUIA Forte Fil restorations, roughen the surface to be coated with superfine diamond burs.

5. Coating

Spray preparation dust away with water and dry by gently blowing with oil-free air. Ensure the surfaces to be coated are dry, but avoid desiccation. For bottle type, dispense a few drops of EQUIA Forte Coat into a disposable dispensing dish and replace the bottle cap immediately. For unit dose type, unscrew the cap counterclockwise, ensuring you identify the top and bottom of the unit dose before opening. IMMEDIATELY apply the material (within 1 minute after dispensing) to the surfaces to be coated using a disposable micro-tip applicator. Make sure the applicator is firmly fixed. Use floss to apply the coating to the approximal surface. DO NOT AIR BLOW.

Note:

Non-bur cut enamel should be treated with a 35-40% phosphoric acid as per the manufacturer’s instructions. Rinse and dry with oil-free air.
If the coated surface is contaminated with water, blood, or saliva prior to light curing, wash and dry the surface and repeat the coating procedure.
Ambient light may shorten the working time. It is recommended to decrease the light intensity or turn off the operation light during cementation.
If the cap of the unit dose is too tight to open, do not force it. Use another unit dose to avoid accidental contact with the liquid.
Unit dose capsules are disposable. Do not recap or reuse them to prevent cross-contamination.

6. Light Curing

IMMEDIATELY light cure all coated surfaces with a visible light-curing unit (minimum >500mW/cm²: Halogen, GC G-Light, LED) for 20 seconds.

Note:

Place the light source as close as possible to the coated surface.
If the surface remains tacky or yellowish, repeat light curing.
Always use protective eye wear or a light shield during light curing.
EQUIA Forte Coat may produce a brief exothermic reaction during curing, which can be minimized by applying a thin layer. Avoid curing on soft tissue.

+91-9912355536